WELL-KLEAN © · THE PROGRAM
What is Well-Klean©?
Well-Klean© is HCT's chemical water well rehabilitation program: proprietary, corrosion-inhibited chemistry sized to each well's own data, applied by authorized dealers, and proven with a pumping test. It removes the biofilm and mineral scale that plug most declining wells instead of treating the symptoms.
Municipal, industrial, agricultural and golf course wells · NSF/ANSI/CAN 60 listed chemistry · Applied by authorized Well-Klean© dealers
WHAT WELL-KLEAN© IS
In HCT's assessments, nine out of ten declining wells are biofouled, not broken.
Most lost capacity is biofilm and mineral scale, not structural failure. Chlorine, straight acid and brushing treat what you can see; Well-Klean© removes the biofilm and the scale it protects, which is why the capacity you recover holds.
The chemistry is NSF/ANSI/CAN 60 listed and formulated in-house; spent solution is neutralized on site and disposed of under local, state and federal requirements. Every treatment plan is built from the well's analytical data, not from a drum of chemical, and users are certified by HCT.
Watch: chlorine versus WaterSOLV™ BC in a water well.
WHY WELLS DECLINE
Three things plug a well, and they work together.
THE CHEMISTRY
Three formulations. Every kind of fouling.
Well-Klean© uses three products, prescribed per well: WaterSOLV™ BC for biological fouling, Pre-blend Descaler for mineral fouling, and Concentrate for compromised casings and equipment. Use rates, soak times and sequence are written into the well-specific scope of work.
THE PROCESS
Assess. Plan. Treat. Verify.
HCT collects eight data points and a groundwater sample before any chemistry is recommended: casing alloy, age of the well, groundwater quality, water level, depth and diameter, perforation type, bacteria risk, pump depth and pumping rate. The scope is checked against HCT's empirical database, then verified in the field with a pumping test.
01
Discovery and data
The well data form and a correctly taken groundwater sample produce a preliminary assessment and quote.
02
Downhole video
Video inspection before treatment confirms the deposit and updates the scope of work.
03
Treat, neutralize, prove it
Mechanical and biological removal, descaling, neutralization, flushing, disinfection and the pumping test that documents the recovery.
CAPACITY
Pumping rates come back
Wells restored to original output, documented on the same well before and after.
COST
Rehab instead of replace
Less drawdown and lower energy per gallon extend the life of the asset.
EFFICIENCY
Sized to the well
Dose set from the well's own volume and data — typically 10–30% of system water volume for Descaler.
CASE STUDIES
Documented, not described.
NEXT STEP
Evaluate your well.
Download the well data form, send it to HCT with a groundwater sample, and you will get back a preliminary scope built on the well's actual condition. Well-Klean© chemistry is sold and applied through authorized dealers; find the dealer for your area or contact HCT directly.
KEEP LEARNING
HCT, LLC · Well-Klean© · Scottsdale, Arizona