WaterSOLV™ CURATIVE
Highly concentrated soil and water treatment designed to improve irrigation efficiency, unlock tied-up nutrients, and remediate sodium-affected soils. Just 1 gallon replaces up to 9 gallons of 93% sulfuric acid—without the corrosive handling risks.
Applied on a linear basis (not by pH), it treats irrigation water to reduce alkalinity and bicarbonates, liberate bound minerals, and convert hardness into plant-available nutrition. In the soil, it improves infiltration, suppresses excess alkalinity, detoxifies sodium and chloride, and enhances overall nutrient availability.
Growers typically see stronger root development, improved crop vigor, better heat stress tolerance, increased yields, and up to 15% reduction in water use due to improved penetration and retention.
Compatible with most fertilizers and irrigation systems (flood, drip, emitters). For injection, apply on the discharge side of pump stations using calculated, continuous linear rates.
Use Rates: Rates are based on water hardness, bicarbonates, and soil conditions. Typical water treatment ranges from ½ to 4 gallons per million gallons of water (or more as needed). Higher initial rates (2–4x) may be required to penetrate compacted or sodium-impacted soils, then reduced for maintenance applications.
Packaging: 55-gallon drum • 265-gallon tote • 5,400-gallon tanker
WaterSOLV™ BC
WaterSOLV™ BC is a stabilized, catalyzed peroxide-based treatment designed to control microbial contamination in irrigation water and soils. It targets slime, biofilm, and black layer conditions caused by iron- and sulfate-reducing bacteria—common contributors to poor infiltration, root stress, and hydrogen sulfide damage.
As it works, WaterSOLV™ BC helps restore water movement through soils, clean drip lines and emitters, and reduce buildup of biological “sheeting” (polysaccharides) that restrict oxygen and nutrient flow. The product also assists in detoxifying soluble sodium and chloride while sequestering minerals into more plant-available forms.
A key benefit is its biodegradation into dissolved oxygen and water—providing continuous chemical aeration in the root zone without leaving harmful residues.
When used with WaterSOLV™ CURATIVE, performance is enhanced, forming a higher level of active peroxide without causing crop yellowing or vegetation damage—even at elevated use rates.
Non-corrosive.
Inject at the suction side of pump stations (never directly into ponds).
Use Rates: Applied linearly based on total bacterial load in source water, with additional rates for soil remediation. Typical rates range from 1 quart to 1.75 gallons per million gallons of water. Protect from direct sunlight during storage and use.
Packaging: 53-gallon drum • 300-gallon tote
WaterSOLV™ CURATIVE ORGANIC
Highly concentrated, non-corrosive soil and water treatment approved for organic production. It delivers the performance of strong acid programs—without the handling risks—replacing up to 9 gallons of 93% sulfuric acid with just 1 gallon of product.
Applied on a linear basis (not by pH), it conditions irrigation water by reducing alkalinity and bicarbonates, unlocking tied-up minerals, and converting hardness into plant-available nutrition. In the soil, it improves infiltration, suppresses excess alkalinity, and helps detoxify sodium and chloride.
The result is improved nutrient availability, stronger root development, better crop vigor and heat stress tolerance, increased production, and typically up to 15% less water use due to improved penetration and retention.
Compatible with most fertilizers and irrigation systems (flood, drip, emitters, or periodic soil applications). For injection, apply on the discharge side of pump stations using calculated, continuous linear rates.
Classified as a non-nutrient Auxiliary Soil and Plant Substance (ASPS) and certified by the California Department of Food and Agriculture.
Use Rates: Rates are based on water hardness, bicarbonates, and soil conditions. Typical treatment ranges from ½ to 4 gallons per million gallons of water (or more as required). Higher initial rates (2–4x) may be used to correct sodium- or chloride-affected soils, then reduced to maintenance levels.
Packaging: 55-gallon drum • 265-gallon tote • 5,400-gallon tanker
